Instrument ribbon microphones, stereo pair

The WA-2FT consists of two Fen-tone ribbon microphones inspired by a classic 1950s design. The mics ship as a pair and are tested to be within ±1 dB of each other. Suitable for stereo recordings of electric and acoustic guitars, piano, overheads, horns or strings.

• Two ribbon microphones with figure-8 polar pattern
• Selectable 26 dB in-line preamp (Warm Lifter, JFET) in +dB mode, requires 48 V phantom power
• Passive mode (VT) without phantom power – do not apply 48 V in this mode
• 99.1% aluminum ribbon, 1.8 µm thick, made in Japan
• Neodymium magnet and USA-made CineMag transformer
• Frequency response: 30 Hz – 15 kHz (±3 dB)
• Max. SPL: 148 dB (1 kHz, ≤ 1% THD)
• Output impedance: 300 ohms (passive), 150 ohms (active)
• Sensitivity: -47 dBV (passive), -21 dBV (active), re 1 V/Pa
• Signal-to-noise ratio: 87 dB
• Per microphone: 170 x 38 mm (L x W), 304 g
• Included: flight case, 2 mic clips, 2 protective socks