Mastering tube limiter/compressor with M/S modification

The Manley Stereo Variable Mu Mastering is the mastering version of the Variable Mu tube limiter/compressor: detented stepped switches replace the potentiometers for precisely repeatable settings. This version is additionally factory-fitted with the M/S modification.

• Two operating modes: Compress (1.5:1, soft knee) and Limit (4:1, rising to 20:1 above 12 dB of gain reduction)
• Input, output, threshold and attack on detented stepped switches with gold contacts and 1 % precision resistors for accurate channel matching and recall
• M/S modification: separate M/S switches for input and output; with both engaged, the mid and side signals are processed separately (channel 1 mid, channel 2 side)
• With the channels working separately, stereo width can be adjusted via the gain reduction; M/S microphone recordings can also simply be decoded
• Manley input and output transformers with nickel laminations in mu-metal cases, balanced inputs and outputs (600 ohms)
• Output and threshold in 0.5 dB steps, recovery in five steps (0.2 / 0.4 / 0.6 / 4 / 8 s)
• High-pass side-chain filter (HP SC), link switch for linked or independent channels, hard-wire bypass, illuminated Sifam meters for gain reduction
• Frequency response 20 Hz – 25 kHz, max. output level +30 dBu, noise floor -85 dB
• Tubes per channel: 5670, 5751 or 12AX7, 12BH7 and 12AL5 as side-chain rectifier
• 19-inch rack unit, 2U: 19 x 3.5 x 10 inches (approx. 483 x 89 x 254 mm), the power transformer protrudes 3.5 inches at the rear; power consumption 80 W
• Hand-assembled in California, USA