Products from RME Audio

Universal Analog Breakout Box 16 XLR outputs on 2 sub D25 connectors (channel 1-8 and channel 9-16) Supports all devices with sub-D25 connection Type: 19" / 1 HU

Universal Breakout Console for D-Sub 25 (Analogue) 8 x XLR male 8 x XLR female 2 x D-Sub 25 Pin layout: TASCAM Supports all interfaces with analog D-Sub I / Os as well as the following RME interfaces: ADI-8 QS, ADI-8 DS Mk III, M-32 AD, M-32 DA, M-16 AD, M-16 DA Removable rack ears Can be both front and rear mounted in the rack Format: 19" / 1U

Universal AES/EBU Breakout Box Connectors: 2x Sub-D25 8x XLR inputs 8x XLR outputs RME support (= Tascam) and Yamaha formats (pinout format can be internally altered) Removable rack mounts for front and rear rack installations Design: 19"/ 1U

Active DC Filter Separates, regenerates and filters the output signal of any 12 V DC power supply Significantly improves DC voltage stability for an extremely clean 12 V power supply Enables optimized audio signal and sound image without hum, buzz or other interference caused by power supplies or contaminated mains Based on galvanic isolation and RME’s µFilter (discrete...

Linear Power Supply for RME ADI-2 Series Output 1 (linear): classic DC output with multi-stage passive and active filters, 30,000 µF capacitor bank, ferrite choke, and an active output filter with hybrid voltage regulator Output 2 (µFilter) is based on RME's µFilter technology; the signal is further processed from the pre-filtered linear output using active filters. The...

USB Audio Interface Special Edition 60-Channel USB 2.0 24-bit / 192 kHz Integrated DSP mixer with effects section: EQ, dynamics, and reverb 4 analog microphone preamps with gain control Inputs remotely controllable via software TotalMix Remote TotalMix FX - Mixing / Routing DigiCheck software DC-coupled outputs - CV/Gate voltage control Stand-alone operation with setup...

8-Channel Microphone Preamplifier and AES / ADAT / AD Converter 192 kHz / 24-bit conversion +48 V phantom power switchable per channel Max input level: +21 dBu Clip LEDs Form factor: 19" / 1U Connections: 8 Mic / Line combo inputs: XLR / 6.3 mm TRS balanced 8 Line outputs: 6.3 mm TRS balanced 2 ADAT outputs (S/MUX – up to 96 kHz) AES/EBU input and output: 25-pin D-sub Word...

PCIe x4 Audio Interface with Milan-Compatible AVB 512/256/128 channels at 48/96/192 kHz sample rate Steady Clock TotalMix Expandable to up to four MADI ports (expansion card sold separately, not included) 2 x RJ45 ports Word Clock input and output via BNC AES3 input and output via DB9 to XLR breakout cable MIDI input and output via DB9 to 2 x DIN breakout cable Stereo...

PCIe x4 Audio Interface with DANTE and MADI 512/256/128 channels at 48/96/192 kHz sample rates Steady Clock TotalMix Expandable to up to four MADI ports (expansion card sold separately, not included) 2 x RJ45 ports Word Clock input and output via BNC AES3 input and output via DB9 to XLR breakout cable MIDI input and output via DB9 to 2 x DIN breakout cable Stereo headphone...

PCIe x4 Audio Interface with DANTE and MADI 512/256/128 channels at 48/96/192 kHz sample rates Steady Clock TotalMix Expandable to up to four MADI ports (expansion card sold separately, not included) 2 x RJ45 ports Word Clock input and output via BNC AES3 input and output via DB9 to XLR breakout cable MIDI input and output via DB9 to 2 x DIN breakout cable Stereo headphone...

8-Channel AES42 Interface & Controller for Digital Microphones 8 x AES42 Input (XLR) 8 x Analog Output (XLR) 4 x AES/EBU Out (8 channels @ 192 kHz) 2 x ADAT Out (8 channels @ 96 kHz) MIDI I/O Wordclock I/O Com Port I/O (RS-232 via 9-pin D-sub) Optional: MADI I/O (I64 MADI Card) Fully AES42 compliant 8 XLR AES42 inputs (AES3 compatible) 8 balanced XLR line outputs 24-bit...

Remote Control Easy operation of TotalMix FX software Compatible with RME Fireface UFX + and UFX II (direct) and all RME devices with TotalMix FX (via computer) Controls the DSP-based routing and effects section USB or remote interface (stand-alone operation) 15 programmable illuminated function buttons Programmable connection for foot switch Jog wheel for parameter change...