Products from SPL

Monitor Controller and 2x2 Audio Interface Monitor controller with 2 outputs for connecting two pairs of speakers (A / B) Output A with additional subwoofer out Off switch for the monitor section 1 Stereo TRS jack input and 1 stereo TS jack input Stereo TS jack Line Out loops the selected signal through unchanged Three monitoring modes: stereo, mono and L / R> R / L...

Monitor And Talkback Controller 4 Stereo inputs: 3x balanced, 1x cinch 3 Output pairs for stereo loudspeakers 1 Mono output for subwoofer 2 Audiophile headphone amplifiers with individual volume control Phonitor matrix Integrated talkback system Cue mix pay-in path for artist-monitor mix Monitoring modes: phase inversion, mono, M/S and LR swap Meter Out Dimensions (W x H x...

Microphone Preamp High quality Class A micro and instrument preamp 60 V technology 125 dB dynamic with 30 dB gain Separately adjustable solid-state and tube preamps for a stepless transition from clean transistor preamplification to tube saturation Peak limiter Switchable input impedances: 200 Ohm, 1.2 kOhm and 10 kOhm Adjustable high-pass filter: 12 dB / 50 Hz 48 V phantom...

Stereo Image Processor Range: Selects the frequency range to be processed Stage: Selected frequency range can be moved backwards or forwards on the stereo stage Bigness: Adjusts the intensity of the stereo image Bypass switch Signal LED Construction: API Series 500 format, requires two 500 slots

Transient Designer - 500 module Extended original Transient Designer circuitry Attack, sustain, output level and mix controls (blend between 'wet' and 'dry') Differential Envelope Technology (DET) On / Bypass toggle switch Signal LED 500 series rack module (single slot)

Dual dand deesser 500 module Removal of sibilant noise via phase cancellation 2-band processing: Hi-S and Lo-S Controls for Hi-S and Lo-S De-S intensity LED display Male / Female voice selection On / Bypass toggle switch Signal LED Single slot 500 series rack module

Headphone monitoring amp with the Phonitor Matrix 500 module Two separately adjustable headphone outputs, each with their own separate amplifier stages Phase reversal of L and R channels, as well as stereo / mono / mute switching Electronically balanced Impedance: 10 kOhm Max. input level: +21 dBu Max. output level: +18 dBu @ 600 ohm, +15 dBu @ 300 ohm, +5 dBu @ 32 ohm...

Lundahl Transformers Transformers can be used as an alternative to electronic balancing stages in the inputs and outputs Bass and fundamental range becomes rounder, fuller and gets more pressure High and overtone range sounds a bit silkier and more present When equipped with input and output transformers and completely symmetrical cabling, no voltages can enter the device...

Lundahl Transformers Transformers can be used as an alternative to electronic balancing stages in the inputs and outputs Bass and fundamental range becomes rounder, fuller and gets more pressure High and overtone range sounds a bit silkier and more present When equipped with input and output transformers and completely symmetrical cabling, no voltages can enter the device...

Expansion Rack Rackmount for SMC 7.1, Phonitor 3 DAC, Phonitor 2 Increases the number of active speakers or power amplifiers that can be connected from 1 to 4 Dimension (W x H x D): 482 x 88 x 300 mm Weight: 2.7 kg Shown Phonitor 2 not part of delivery

Expansion Rack Rackmount for SMC 7.1, Phonitor 3 DAC, Phonitor 2 Increases the number of active speakers or power amplifiers that can be connected from 1 to 4 Dimension (W x H x D): 482 x 88 x 300 mm Weight: 2.7 kg Shown Phonitor 2 not part of delivery

Headphone Amplifier, Monitor Controller and DAC with 120V Technology 6 Digital & analogue stereo inputs: 2x XLR stereo, USB, S/PDIF (coaxial), S/PDIF (optical) and ES/EBU (XLR) Output switch for easy switching from headphone to speaker playback, plus mute function in the centre position DAC converter: 32 bit, up to 768 kHz Support for DSD files up to DSD256 Phonitor matrix...